تدفق الهواء


Volume flow rate Q = mean air velocity × duct cross-sectional area.

Volume flow rate Q = mean air velocity × duct cross-sectional area. Rectangular area = width × height; circular area = π × radius². Use mean duct velocity, not a single-point reading unless it represents the mean. This is a geometric conversion; no correction for compressibility, temperature or pressure is made.

Rectangular: Flow rate

أدخل القيم:
النتائج:

About this calculator

Volume flow rate Q = mean air velocity × duct cross-sectional area. Rectangular area = width × height; circular area = π × radius². Use mean duct velocity, not a single-point reading unless it represents the mean. This is a geometric conversion; no correction for compressibility, temperature or pressure is made.

It has 4 modes: Rectangular: Flow rate, Rectangular: Mean velocity, Circular: Flow rate, Circular: Mean velocity. Pick the tab for the quantity you want.

What you need

  • Duct width; the unit box converts between m, cm, mm, in, ft.
  • Duct height; the unit box converts between m, cm, mm, in, ft.
  • Mean air velocity; the unit box converts between m/s, ft/s, km/h, mph (minimum 0).

Formula

Flow rate = v*(w*h).

Worked example

With duct width 2 m, duct height 2 m, mean air velocity 10 m/s in Rectangular: Flow rate mode, the calculator gives flow rate = 40 m³/s.

How to read the result

The main result is the flow rate, shown after you click Calculate; the copy button next to it copies the value.