حساب الضجيج الحراري
Johnson–Nyquist open-circuit voltage e = √(4kTBR), with exact SI Boltzmann constant k = 1.380649×10⁻²³ J/K.
Johnson–Nyquist open-circuit voltage e = √(4kTBR), with exact SI Boltzmann constant k = 1.380649×10⁻²³ J/K. This updates the old constant. B is equivalent noise bandwidth, T absolute temperature, R resistance. Assumes the classical white-noise regime and a frequency-independent resistor; loaded voltage depends on the connected impedance. dBu is relative to √0.6 V (about 0.7746 V); dBV is relative to 1 V. Positive T, B and R are required for finite logarithmic levels.
About this calculator
Johnson–Nyquist open-circuit voltage e = √(4kTBR), with exact SI Boltzmann constant k = 1.380649×10⁻²³ J/K. This updates the old constant. B is equivalent noise bandwidth, T absolute temperature, R resistance. Assumes the classical white-noise regime and a frequency-independent resistor; loaded voltage depends on the connected impedance. dBu is relative to √0.6 V (about 0.7746 V); dBV is relative to 1 V. Positive T, B and R are required for finite logarithmic levels.
It has 3 modes: Temperature in Celsius, Temperature in kelvin, Temperature in Fahrenheit. Pick the tab for the quantity you want.
What you need
- Absolute thermodynamic temperature in °C (minimum -273.15).
- Equivalent noise bandwidth in Hz.
- Resistance in Ω.
Formula
Open-circuit RMS noise voltage = sqrt(4*1.380649e-23*(T+273.15)*B*R).
Noise level relative to √0.6 V = 20*log10(rms/sqrt(0.6)).
Noise level relative to 1 V = 20*log10(rms).
Worked example
With absolute thermodynamic temperature 25 °C, equivalent noise bandwidth 2 Hz, resistance 10 Ω in Temperature in Celsius mode, the calculator gives open-circuit RMS noise voltage = 5.739e-10 V RMS.
How to read the result
The main result is the open-circuit RMS noise voltage, shown after you click Calculate; the copy button next to it copies the value. Additional results: noise level relative to √0.6 V, noise level relative to 1 V.