Freight Class Calculator | CalculatorEdge
LTL freight is priced by class, and density is the starting point for many commodities. Enter the weight and dimensions of one handling unit, such as a pallet, to get its density in lb/ft3 and the freight class that density range suggests.
Enter the total weight and the dimensions of one handling unit, such as a pallet.
How the freight class estimate works
The calculator works out the shipment's volume in cubic feet, divides the weight by that volume to get density, then reads the class from the density guidelines used by the National Motor Freight Classification (NMFC).
Density and class formula
Density (lb/ft3) = Weight (lb) / Volume (ft3)
The density guidelines map 50 lb/ft3 and above to class 50, stepping up through 55, 60, 65, 70, 77.5, 85, 92.5, 100, 110, 125, 150, 175, 200, 250, 300 and 400, down to class 500 for anything under 1 lb/ft3.
Worked example
A pallet weighs 500 lb and measures 48 x 40 x 60 inches. That is 66.7 ft3, so the density is 500 / 66.7 = 7.5 lb/ft3. A density between 7 and 8 lb/ft3 falls in class 125.
FAQ
What is freight class?
Freight class is an 18-step scale (50 to 500) that LTL carriers in the US use to rate shipments. Lower classes are dense and cheap to move; higher classes are light, bulky or fragile and cost more per pound.
Is density the only thing that sets the class?
No. The NMFC also considers handling, stowability and liability, and many commodities carry a fixed class regardless of density. Treat this estimate as a starting point: the NMFC listing and your carrier decide the final class.
Why does the class matter?
LTL tariffs are built on class. Quoting the wrong class is the most common cause of re-billing adjustments, so estimating it before you book saves disputes later.