Ganzoni Equation Iron Deficit Calculator
Estimate the total intravenous iron needed to correct iron deficiency anemia: the Ganzoni equation adds the iron missing from hemoglobin to the iron needed to refill stores.
Enter weight, current and target hemoglobin.
What this calculator is and when it is used
The Ganzoni equation estimates the cumulative iron deficit in iron deficiency anemia, so a total intravenous iron dose can be planned. It combines the iron needed to bring hemoglobin back to target with the iron needed to rebuild body stores (the depot).
Use it after iron deficiency anemia is diagnosed and IV iron is planned. The result is the total deficit, not the dose per infusion: each iron product has its own maximum per dose, so the total is usually split across infusions.
What you need to enter
- Body weight in kg or lb. Use ideal body weight in patients who are overweight, and actual weight if underweight.
- Actual hemoglobin: the patient's current Hb, in g/dL or g/L (the unit box converts).
- Target hemoglobin: commonly 13 g/dL (130 g/L) or 15 g/dL (150 g/L) depending on local policy; the UK pregnancy guideline uses 11 g/dL (110 g/L) from the second trimester.
How to read the result
The result is an estimated total iron deficit in milligrams, not an automatically approved IV dose. Divide it into doses according to the chosen product's maximum per infusion and local policy. Follow the prescribing clinician and product information for the route and schedule.
Formula
Total iron deficit (mg) = body weight (kg) x (target Hb - actual Hb, in g/L) x 0.24 + iron depot (mg). The factor 0.24 comes from the iron content of hemoglobin (0.34%), a blood volume of 7% of body weight, and the g-to-mg conversion. The depot is 500 mg at 35 kg body weight or more, and 15 mg/kg below that.
Worked example
A 70 kg woman with Hb 8.0 g/dL (80 g/L) and a target of 15 g/dL (150 g/L): 70 x (150 - 80) x 0.24 + 500 = 1,676 mg, about 1,700 mg of iron in total, divided into infusions as the product allows.
Limitations
- An estimate, not a prescription: ongoing blood loss, inflammation and pregnancy change iron needs.
- Choose the target Hb for the population (lower in pregnancy and chronic kidney disease).
- Do not exceed the product's maximum dose per infusion; the equation gives the total, not the schedule.
Reference
- Australian National Blood Authority. Iron product choice and dose calculation for adults (Ganzoni formula, depot values and worked example), March 2016.
- Ganzoni AM. Intravenous iron-dextran: therapeutic and experimental possibilities. Schweiz Med Wochenschr 1970;100(7):301-303.
Disclaimer. Medical information only. This calculator is an educational aid for clinicians and students. It does not give medical advice, diagnosis or treatment, and it does not replace clinical judgment. Check results against the original source and local protocols before using them in patient care.
Iron Product Choice and Dose Calculation, National Blood Authority, 2016 (adapted, CC BY 3.0 AU)