Amps to Watts Calculator (Volts, Amps, Watts Converter)


Convert between amps, watts and volts for DC, single-phase and three-phase AC circuits, with a power factor input for real AC loads.

Pick what to find, enter the other two values. Leave power factor at 1 for DC and resistive loads.

Find amps

Enter your values:
Results:

How it works

DC and single-phase: P = V × I × PF. Three-phase: P = √3 × V(line) × I × PF. Any one quantity comes out of the other two - pick the mode for what you want to find.

  • Power factor is 1.0 for resistive loads (heaters, incandescent), about 0.8-0.95 for motors and 0.5-0.7 for older fluorescent lighting.
  • Example: 1,800 W on a 120 V circuit draws 15 A - the full rating of a 15 A breaker, so continuous use belongs on a 20 A circuit.
  • For three-phase, enter the line-to-line voltage (208, 400 or 480 V), not the phase voltage.

VA vs watts: at PF below 1.0 the current is higher than watts ÷ volts suggests; size wiring from the current, not the watts.