Breaker Size Calculator (with Wire Pairing)


The standard breaker size for a load current, applying the NEC 125% rule for continuous loads, with the matching copper wire gauge (NM-B) for each breaker.

Enter the load current and whether it runs 3+ hours at a stretch.

Enter your values:
Results:

How it works

Required rating = load current × 1.25 for loads that run 3 hours or more (continuous), or × 1.0 otherwise; the breaker is the next standard size up (15, 20, 25, 30 A ... per NEC 240.6).

  • Typical pairings (copper NM-B): 15 A = 14 AWG, 20 A = 12 AWG, 30 A = 10 AWG, 40 A = 8 AWG, 55 A = 6 AWG, 70 A = 4 AWG.
  • Motor, HVAC and welder circuits follow their own NEC articles - use the nameplate rules, not this general tool.
  • Never upsize a breaker without upsizing the wire: the breaker protects the wire, not the appliance.

Guidance, not an electrical design. The result reads 0 above 100 A - service and feeder sizing needs a licensed electrician and the full NEC load calculation.