Composite Beam Design Calculator
Elastic transformed-section check of a composite steel-concrete beam: find the neutral axis, transformed moment of inertia and the bending stresses in the concrete slab and steel section under a sagging moment, assuming full composite action.
Enter the steel section, slab, materials and applied sagging moment.
How it works
The concrete slab is transformed into an equivalent steel width b(e)/n and the composite section is analysed elastically: neutral axis from first moments of area, transformed I from the parallel-axis theorem, then σ = M·y / I (concrete stresses divided by n). Checks shown are simple allowable-stress ratios (0.45 f(ck) concrete, f(y) steel).
- Assumes full shear connection (adequate studs), uncracked slab in sagging, and short-term loading with the given modular ratio.
- For long-term (creep) effects use a larger effective modular ratio, roughly 2n to 3n.
- Effective width: use the governing code limit (span/4, stud spacing, or slab-thickness rule).
Preliminary elastic check only. Final design to AISC 360 / Eurocode 4 uses plastic stress blocks, partial interaction, shear stud design and serviceability checks.