Gear Contact Stress Calculator (Lewis + Hertz)


Estimate the two classic spur-gear stresses: tooth bending stress from the Lewis equation and surface contact (pitting) stress from the Hertz/AGMA-style relation, for a steel gear pair transmitting a given power.

Enter the drive data. Pinion = smaller gear.

Enter your values:
Results:

How it works

Tangential load F(t) = 2T/d(1) from the pinion torque. Lewis bending stress σ(F) = F(t)·K(o) / (b·m·Y) with the 20° full-depth Lewis form factor Y = 0.154 − 0.912/z. Contact stress σ(H) = Z(E)·√(F(t)·K(o)·(u+1)/(b·d(1)·u)), the simplified Hertz/AGMA form with elastic factor Z(E) for the material pair and u = z(2)/z(1).

  • Compare bending stress with the bending endurance limit of the gear material (roughly S(ut)/3 for through-hardened steel) and contact stress with the surface endurance limit (about 2.8×HB MPa for steel, as a first guide).
  • Dynamic effects at pitch-line speeds above ~10 m/s need a velocity factor; this estimate excludes it.
  • Helical gears: use normal module and virtual tooth count z/cos³(helix angle).

Estimate only. Rated design to ISO 6336 / AGMA 2001 adds geometry, load-distribution, life and reliability factors. Tools like MITCalc or KISSsoft do the full rating.