Packed Column Pressure Drop Calculator (Ergun)


Pressure drop through a packed bed from the Ergun equation, covering both the viscous (Blake-Kozeny) and inertial (Burke-Plummer) terms, with the particle Reynolds number so you can see which regime you are in.

Enter packing, fluid and flow data. Superficial velocity = flow / empty column area.

Enter your values:
Results:

How it works

ΔP/L = 150μ(1−ε)²u(0)/(ε³D(p)²) + 1.75(1−ε)ρu(0)²/(ε³D(p)). Below a particle Reynolds number of about 10 the viscous term dominates; above ~1000 the inertial term does. Re(p) here uses D(p)/(1−ε) convention.

  • For distillation/absorption packings (Raschig rings, Pall rings, structured packing) the generalised pressure drop correlation (GPDC) of the vendor is more accurate - Ergun suits granular beds, catalyst pellets and filters.
  • Typical design pressure drops: 1-4 mbar/m for distillation packings.
  • Flooding is a separate limit; pressure drop rises sharply near it.

Ergun estimate. Use the packing vendor's GPDC chart for final column hydraulics and the flooding check.