Shallow Footing Bearing Capacity Calculator


Compute the ultimate and allowable bearing pressure of a shallow footing from soil cohesion, friction angle, unit weight and footing geometry, with Terzaghi shape factors and your factor of safety.

Enter the soil properties, footing geometry and factor of safety.

Enter your values:
Results:

How it works

Terzaghi's general shear failure equation: qult = c·Nc·sc + γDf·Nq + 0.5·γ·B·Nγ·sγ. The bearing factors come from Nq = eπtanφtan²(45°+φ/2), Nc = (Nq−1)cotφ (5.7 at φ=0), and Nγ = 1.8(Nq−1)tan(1.4φ) (Kumbhojkar fit of Terzaghi's values).

  • Shape factors: strip 1.0/1.0, square 1.3/0.8, circular 1.3/0.6, rectangular (1+0.3B/L)/(1−0.2B/L) for the cohesion and weight terms.
  • Allowable pressure = net ultimate / FS + overburden γDf. FS of 2.5-3 is common for static loads.
  • Assumes general shear failure, homogeneous soil, no water table correction and vertical centred load. Use effective unit weight below the water table and reduce the result accordingly.

Preliminary design only. Confirm with a geotechnical investigation; settlement often governs before bearing capacity. See also the Terzaghi and Meyerhof bearing capacity calculators for other factor conventions.