Speeds and Feeds Calculator (RPM and Feed Rate)
Spindle RPM from the material's cutting speed and tool diameter, and feed rate from feed per tooth and flute count - for milling, drilling and turning, in metric or SFM units.
Pick the material, enter the tool diameter and feed per tooth.
How it works
RPM = 1000 × cutting speed (m/min) ÷ (π × tool diameter in mm), equivalently SFM × 3.82 ÷ diameter in inches. Feed rate = RPM × feed per tooth × number of flutes.
- The material presets are typical HSS values for milling/drilling; coated carbide can run 2-4× faster, and drilling runs about 25-30% slower than milling in the same material.
- Feed per tooth: 0.02-0.05 mm for small end mills in steel, 0.05-0.15 mm for larger tools and softer material; start low and listen to the cut.
- For turning, the diameter is the workpiece diameter, not the tool.
Presets are starting points. Machine rigidity, tool overhang and coolant all matter; the toolmaker's data sheet wins when you have it.