Spulenwicklung
Seven coil-winding tools: AWG and SWG wire converters, optimum wire tension, coil resistance correction to 25 °C or 20 °C, production rates and a toroid winding calculator.
Pick a tool, enter your values and click Calculate. Results appear below.
How it works
AWG / SWG converters: look up the wire diameter for the gauge in the standard AWG (1-56) and SWG (1-50) tables and compute the cross-section area π(d/2)².
Optimum wire tension: t = 4.6818 × d1.7661 grams, with the diameter d in mm (the original page's empirical fit).
Resistance correction: R25 = R / (0.004×T + 0.9019) and R20 = R / (0.0039×T + 0.9216), where R is the resistance measured at room temperature T in °C (copper wire).
Production rates: hourly = 3600 × machines ÷ cycle seconds; monthly = hourly × 8 × shifts × 21.5 days; yearly = hourly × operating hours per shift × shifts. Each rate is also shown at your efficiency percentage.
Toroid winding: wire length per turn = (OD − ID) + 2 × height; turns per layer = π × ID ÷ wire diameter; shuttle passes use 4-inch (0.3192 m) and 6-inch (0.4788 m) shuttle circumferences.
Note on this rebuild (November 2026)
Formulas and tables are the original ones from /electronics/coilwinding.htm; the gauge-range check now actually rejects out-of-range values (the old check had a bug and never triggered).