Soldadura a tope bajo carga transversal
Uniform stress over effective rectangular throat area A = Ld.
Uniform stress over effective rectangular throat area A = Ld. Normal stress σ = P/A, shear τ = V/A, Mohr-circle centre = σ/2, maximum shear = √[(σ/2)²+τ²], principal stresses = σ/2 ± maximum shear. Assumes plane stress with the other direct stress zero. Original stress equations are retained with consistent SI conversion. This does not check weld strength, fatigue, eccentricity, workmanship or code compliance.
About this calculator
Uniform stress over effective rectangular throat area A = Ld. Normal stress σ = P/A, shear τ = V/A, Mohr-circle centre = σ/2, maximum shear = √[(σ/2)²+τ²], principal stresses = σ/2 ± maximum shear. Assumes plane stress with the other direct stress zero. Original stress equations are retained with consistent SI conversion. This does not check weld strength, fatigue, eccentricity, workmanship or code compliance.
What you need
- Effective weld length; the unit box converts between m, cm, mm, in, ft.
- Effective throat depth; the unit box converts between m, cm, mm, in, ft.
- Axial force (tension positive); the unit box converts between N, kN, lbf, kgf.
- Shear force; the unit box converts between N, kN, lbf, kgf.
Formula
Normal stress = P/(d*L).
Shear stress = V/(d*L).
Mohr-circle average normal stress = normal/2.
Worked example
With effective weld length 2 m, effective throat depth 10 m, axial force (tension positive) 10 N, shear force 10 N in Axial and transverse weld stress mode, the calculator gives normal stress = 0.5 Pa; shear stress = 0.5 Pa.
How to read the result
The main result is the normal stress, shown after you click Calculate; the copy button next to it copies the value. Additional results: shear stress, mohr-circle average normal stress, maximum shear stress.