Densité de flux maximale


Work out aC peak flux density, dC flux density and maximum flux density.

Saisissez les valeurs et cliquez sur Calculer. Les résultats s’affichent ci-dessous.

Saisissez vos valeurs :
Résultats :

About this calculator

The maximum flux density calculator works out aC peak flux density, dC flux density, maximum flux density from rMS voltage, frequency, number of turns, core cross-section Ae, used in electronics and circuit design. Enter your values and it computes the result instantly.

What you need

  • RMS voltage; the unit box converts between mV, V, kV.
  • Frequency; the unit box converts between Hz, kHz, MHz, GHz.
  • Number of turns (minimum 1).
  • Core cross-section Ae; the unit box converts between mm², cm², m², in², ft².
  • DC current; the unit box converts between µA, mA, A.
  • Inductance factor AL; the unit box converts between nH/turn², µH/turn².

Formula

AC peak flux density = bac.

DC flux density = bdc.

Maximum flux density = bac+bdc.

Where bac = vrms/(4.44*f*n*ae); bdc = al*n*idc/ae.

Worked example

With rMS voltage 10 V, frequency 1,000.00 kHz, number of turns 20, core cross-section Ae 10 cm², dC current 10 A, inductance factor AL 10 nH/turn², the calculator gives aC peak flux density = 1.1261 gauss; dC flux density = 20 gauss; maximum flux density = 21.1261 gauss.

How to read the result

The main result is the aC peak flux density, shown after you click Calculate; the copy button next to it copies the value. Additional results: dC flux density, maximum flux density.