Coulage de dalle en béton


Geometric volume only, excluding waste, settlement and over-excavation.

Geometric volume only, excluding waste, settlement and over-excavation. Rectangular volume = length × width × depth; circular volume = π × diameter² × height / 4. Unused slab dimensions can remain zero. Unlike the old page, intermediate volumes are not rounded before summing. Select cubic yards in the results when needed.

Up to four rectangular slabs

Saisissez vos valeurs :
Résultats :

About this calculator

Geometric volume only, excluding waste, settlement and over-excavation. Rectangular volume = length × width × depth; circular volume = π × diameter² × height / 4. Unused slab dimensions can remain zero. Unlike the old page, intermediate volumes are not rounded before summing. Select cubic yards in the results when needed.

It has 3 modes: Up to four rectangular slabs, Rectangular footing, Circular columns. Pick the tab for the quantity you want.

What you need

  • Slab 1: Length; the unit box converts between m, cm, mm, in, ft (minimum 0).
  • Slab 1: Width; the unit box converts between m, cm, mm, in, ft (minimum 0).
  • Slab 1: Depth; the unit box converts between m, cm, mm, in, ft (minimum 0).
  • Slab 2: Length; the unit box converts between m, cm, mm, in, ft (minimum 0).
  • Slab 2: Width; the unit box converts between m, cm, mm, in, ft (minimum 0).
  • Slab 2: Depth; the unit box converts between m, cm, mm, in, ft (minimum 0).
  • Slab 3: Length; the unit box converts between m, cm, mm, in, ft (minimum 0).
  • Slab 3: Width; the unit box converts between m, cm, mm, in, ft (minimum 0).
  • Slab 3: Depth; the unit box converts between m, cm, mm, in, ft (minimum 0).
  • Slab 4: Length; the unit box converts between m, cm, mm, in, ft (minimum 0).
  • Slab 4: Width; the unit box converts between m, cm, mm, in, ft (minimum 0).
  • Slab 4: Depth; the unit box converts between m, cm, mm, in, ft (minimum 0).

Formula

Slab 1 volume = L1*W1*d1.

Slab 2 volume = L2*W2*d2.

Slab 3 volume = L3*W3*d3.

Worked example

With slab 1: Length 2 m, slab 1: Width 2 m, slab 1: Depth 10 m, slab 2: Length 2 m, slab 2: Width 2 m, slab 2: Depth 10 m, slab 3: Length 2 m, slab 3: Width 2 m, slab 3: Depth 10 m, slab 4: Length 2 m, slab 4: Width 2 m, slab 4: Depth 10 m in Up to four rectangular slabs mode, the calculator gives slab 1 volume = 40 m³; slab 2 volume = 40 m³; slab 3 volume = 40 m³; slab 4 volume = 40 m³; total slab volume = 160 m³.

How to read the result

The main result is the slab 1 volume, shown after you click Calculate; the copy button next to it copies the value. Additional results: slab 2 volume, slab 3 volume, slab 4 volume.