관 난류
Darcy–Weisbach h = (fL/D + ΣK)v²/(2g), v = 4Q/(πD²), with g = 9.81 m/s².
Darcy–Weisbach h = (fL/D + ΣK)v²/(2g), v = 4Q/(πD²), with g = 9.81 m/s². f is Darcy, not Fanning. Colebrook modes solve 1/√f = −2 log10[ks/(3.7D)+2.51/(Re√f)] for Re≥4000 and relative roughness≤0.05; laminar and transitional flow are rejected. Fixed-factor modes use the entered f without a roughness or flow-regime check. Minor-loss K is dimensionless, correcting the old metre caption. Iterations are bounded (40 friction / 60 diameter updates) with residual validation; unconverged results are rejected, not silently returned. No compressibility, heat-transfer, pump-selection or network calculation is included.
About this calculator
Darcy–Weisbach h = (fL/D + ΣK)v²/(2g), v = 4Q/(πD²), with g = 9.81 m/s². f is Darcy, not Fanning. Colebrook modes solve 1/√f = −2 log10[ks/(3.7D)+2.51/(Re√f)] for Re≥4000 and relative roughness≤0.05; laminar and transitional flow are rejected. Fixed-factor modes use the entered f without a roughness or flow-regime check. Minor-loss K is dimensionless, correcting the old metre caption. Iterations are bounded (40 friction / 60 diameter updates) with residual validation; unconverged results are rejected, not silently returned. No compressibility, heat-transfer, pump-selection or network calculation is included.
It has 6 modes: Head loss / Colebrook factor, Head loss / entered factor, Volume flow rate / Colebrook factor, Volume flow rate / entered factor, Pipe diameter / Colebrook factor, Pipe diameter / entered factor. Pick the tab for the quantity you want.
What you need
- Pipe length; the unit box converts between m, cm, mm, in, ft.
- Internal diameter; the unit box converts between m, cm, mm, in, ft.
- Volume flow rate; the unit box converts between m³/s, L/s, m³/h, US gal/min.
- Kinematic viscosity; the unit box converts between m²/s, mm²/s (cSt).
- Equivalent sand roughness; the unit box converts between m, cm, mm, in, ft (minimum 0).
- Sum of minor-loss coefficients (minimum 0).
Formula
Total head loss = answer.
Darcy friction factor = f.
Mean velocity = v.
Worked example
With pipe length 2 m, internal diameter 2 m, volume flow rate 5 m³/s, kinematic viscosity 10 m²/s, equivalent sand roughness 10 m, sum of minor-loss coefficients 10 in Head loss / Colebrook factor mode, the calculator gives total head loss = 1.3086 m; darcy friction factor = 0.1358; mean velocity = 1.5915 m/s; reynolds number = 0.3183.
How to read the result
The main result is the total head loss, shown after you click Calculate; the copy button next to it copies the value. Additional results: darcy friction factor, mean velocity, reynolds number.