Friedewald LDL Cholesterol Calculator


Estimate LDL cholesterol from a standard lipid panel using the Friedewald equation.

Enter the values and click Calculate.

Insira os valores:
Resultados:

About this calculator

Most laboratories report LDL cholesterol by calculation. The Friedewald equation assumes that VLDL cholesterol is one fifth of the triglycerides, which holds when the sample is fasting and triglycerides are not very high.

What you need

  • Total cholesterol in mg/dL or mmol/L from a lipid panel; desirable is generally below 200 mg/dL.
  • HDL cholesterol from the same panel, typically 40 to 60 mg/dL.
  • Triglycerides from the same panel, ideally fasting; desirable is below 150 mg/dL. The equation loses validity at 400 mg/dL (4.5 mmol/L) or more.

Formula

LDL-C = total cholesterol - HDL-C - triglycerides / 5 (all in mg/dL).

In mmol/L the divisor is 2.2. This page converts mmol/L to mg/dL before it calculates.

How to read the result

The estimate is read against the familiar LDL cholesterol bands:

LDL-C (mg/dL)Category
Below 100Optimal.
100 to 129Near optimal.
130 to 159Borderline high.
160 to 189High.
190 or moreVery high.

What a given LDL means for an individual depends on their overall cardiovascular risk, so treatment targets are set by risk category in the guidelines rather than by this number alone.

Worked example

Total cholesterol 200, HDL 50, triglycerides 150 mg/dL: LDL = 200 - 50 - 30 = 120 mg/dL.

Common mistakes

  • Using a non-fasting sample with high triglycerides, which distorts the VLDL assumption.
  • Applying the equation when triglycerides are 400 mg/dL or more, or in type III dyslipidemia, where it is invalid.
  • Trusting it at very low LDL levels, where it can underestimate; the Martin-Hopkins or Sampson methods behave better there.

Limitations

Not valid when triglycerides are 400 mg/dL (4.5 mmol/L) or more, in type III dyslipidemia, or in some non-fasting or very low LDL samples, where it can underestimate LDL. Newer methods (Martin-Hopkins, Sampson) are used in some laboratories.

Frequently asked questions

Do I need to fast before the lipid panel?

Fasting keeps triglycerides low and the equation accurate. Non-fasting panels are acceptable for screening in many guidelines, but a high triglyceride result should be repeated fasting before relying on calculated LDL.

What if my triglycerides are over 400?

Ask the laboratory for a direct LDL measurement or a method such as Martin-Hopkins; the Friedewald result should not be used.

Reference

  • Friedewald WT, Levy RI, Fredrickson DS. Estimation of the concentration of low-density lipoprotein cholesterol in plasma, without use of the preparative ultracentrifuge. Clin Chem 1972;18(6):499-502.

Disclaimer. Medical information only. This calculator is an educational aid for clinicians and students. It does not give medical advice, diagnosis or treatment, and it does not replace clinical judgment. Check results against the original source and local protocols before using them in patient care.