Pressão em vasos de parede fina
Thin-walled spherical vessel under uniform internal pressure.
Thin-walled spherical vessel under uniform internal pressure: membrane stress s = p r/(2t); radius increase dR = p r^2 (1-v)/(2Et); volume increase dV = 2 pi p r^4 (1-v)/(Et).
About this calculator
Thin-walled spherical vessel under uniform internal pressure: membrane stress s = p r/(2t); radius increase dR = p r^2 (1-v)/(2Et); volume increase dV = 2 pi p r^4 (1-v)/(Et).
What you need
- Vessel radius; the unit box converts between m, cm, mm, in, ft, yd, km, mi.
- Wall thickness; the unit box converts between m, cm, mm, in, ft, yd, km, mi.
- Modulus of elasticity; the unit box converts between Pa, kPa, MPa, GPa, bar, mbar, psi, atm, mmHg (Torr), inHg, mH₂O, ftH₂O.
- Poisson's ratio (minimum 0).
- Uniform internal pressure; the unit box converts between Pa, kPa, MPa, GPa, bar, mbar, psi, atm, mmHg (Torr), inHg, mH₂O, ftH₂O.
Formula
Thin-walled spherical vessel under uniform internal pressure: membrane stress s = p r/(2t); radius increase dR = p r^2 (1-v)/(2Et); volume increase dV = 2 pi p r^4 (1-v)/(Et).
Worked example
With vessel radius 10 m, wall thickness 2 m, modulus of elasticity 10 Pa, poisson's ratio 0.75, uniform internal pressure 100 Pa in Sphere under internal pressure mode, the calculator gives membrane stress = 250 Pa; increase in radius = 62.5 m; increase in volume = 78,539.82 m³.
How to read the result
The main result is the membrane stress, shown after you click Calculate; the copy button next to it copies the value. Additional results: increase in radius, increase in volume.