Truss Analysis Calculator


Estimate the reactions and maximum member forces of a simply supported parallel-chord truss (Pratt, Howe or Warren layout). Use it for screening and preliminary sizing before a full frame analysis.

Enter the span, depth and panel count, then the applied load.

Uniform load

Insira os valores:

Leave empty to ignore. 0.5-1.5 kN/m is a common first estimate.

Resultados:

How it works

For preliminary sizing a parallel-chord truss is treated like a beam: global equilibrium gives the reactions, and member forces follow from the bending moment and shear. The chord forces are C = M / H (bending moment divided by truss depth), and the end diagonal carries D = V / sin θ, where θ is the diagonal angle atan(H / panel length).

  • Valid for simply supported trusses with parallel chords, loads applied at panel points. UDL is converted to panel-point loads.
  • Pratt diagonals work in tension under gravity load, Howe diagonals in compression, Warren alternate; the magnitudes given here are the same for all three.
  • Chords: top chord in compression (check buckling between panel points), bottom chord in tension.

Screening method only. It does not replace a joint-by-joint method of joints/sections or a frame analysis with real member sizes, load combinations and code checks (e.g. as in SkyCiv or ClearCalcs).