П-образный аттенюатор


Work out ra – shunt resistor (input side), rb – series resistor and rc – shunt resistor (output side).

Введите значения и нажмите «Рассчитать». Результаты появятся ниже.

Введите значения:
dB
Результаты:
dB

About this calculator

The pi attenuator calculator works out ra – shunt resistor (input side), rb – series resistor, rc – shunt resistor (output side) from attenuation (A), input impedance (Zi), output impedance (Zo), used in circuit design and electrical engineering work. Enter your values and it computes the result instantly.

What you need

  • Attenuation (A) in dB.
  • Input impedance (Zi); the unit box converts between Ω, kΩ, MΩ.
  • Output impedance (Zo); the unit box converts between Ω, kΩ, MΩ.

Formula

Ra – shunt resistor (input side) = 1/((k+1)/(zi*(k-1)) - 1/rs).

Rb – series resistor = rs.

Rc – shunt resistor (output side) = 1/((k+1)/(zo*(k-1)) - 1/rs).

Where k = 10^(a/10); rr = max(zi,zo)/min(zi,zo); rs = 0.5*(k-1)*sqrt(zi*zo/k).

Worked example

With attenuation (A) 10 dB, input impedance (Zi) 10 Ω, output impedance (Zo) 10 Ω, the calculator gives ra – shunt resistor (input side) = 19.2495 Ω; rb – series resistor = 14.2302 Ω; rc – shunt resistor (output side) = 19.2495 Ω; minimum possible attenuation for Zi/Zo = 0 dB.

How to read the result

The main result is the ra – shunt resistor (input side), shown after you click Calculate; the copy button next to it copies the value. Additional results: rb – series resistor, rc – shunt resistor (output side), minimum possible attenuation for Zi/Zo.