Prestressed Concrete Beam Calculator


Check the midspan fibre stresses of a straight prestressed concrete beam: effective prestress after losses, self-weight plus superimposed load moment, and the resulting top and bottom stresses compared with your allowable limits.

Enter the section, prestress, losses and loads. Stresses are compression-positive.

Введите значения:

0 for no tension allowed; enter a positive limit otherwise.

Результаты:

How it works

Fibre stresses follow the classic elastic combination σ = P/A ± P·e·c/I ± M·c/I, with compression taken positive. The effective prestress is P(e) = P(i) × (1 − losses). Self-weight uses 25 kN/m³ for reinforced/prestressed concrete; the midspan moment is wL²/8 on the simply supported span.

  • Straight tendon at constant eccentricity e below the centroid; stresses shown at midspan, service stage (after losses).
  • Compression utilisation = max fibre stress / allowable compression; tension margin = allowable tension + minimum fibre stress (negative margin means the tension limit is exceeded).
  • Check stresses also at transfer (before losses, lower concrete strength) and at the support where moment is small.

Preliminary check only. Final design needs loss calculation to the code (elastic shortening, creep, shrinkage, relaxation), shear, deflection and ultimate strength checks to ACI 318 / IS 1343 / Eurocode 2.