Стандартный поверхностный фактор


Work out standard surface factor (SSF).

SSF = (6 / S) x sum(W / D) over the size fractions, where S is the specific gravity, W the fractional weight and D the average diameter of each fraction. Original truncated each W/D to an integer; the exact sum is used. Enter up to four fractions; leave unused ones at 0.

Введите значения:
Результаты:

About this calculator

SSF = (6 / S) x sum(W / D) over the size fractions, where S is the specific gravity, W the fractional weight and D the average diameter of each fraction. Original truncated each W/D to an integer; the exact sum is used. Enter up to four fractions; leave unused ones at 0.

What you need

  • Specific gravity of material (S).
  • Weight W1 (minimum 0).
  • Diameter D1.
  • Weight W2 (minimum 0).
  • Diameter D2 (minimum 0).
  • Weight W3 (minimum 0).
  • Diameter D3 (minimum 0).
  • Weight W4 (minimum 0).
  • Diameter D4 (minimum 0).

Formula

Standard surface factor (SSF) = 6/S*(w1/d1+if(d2>0,w2/d2,0)+if(d3>0,w3/d3,0)+if(d4>0,w4/d4,0)).

Worked example

With specific gravity of material (S) 10, weight W1 70, diameter D1 2, weight W2 70, diameter D2 2, weight W3 70, diameter D3 2, weight W4 70, diameter D4 2, the calculator gives standard surface factor (SSF) = 84.

How to read the result

The main result is the standard surface factor (SSF), shown after you click Calculate; the copy button next to it copies the value.