Sector, Segment and Annulus Calculator


Calculate circular arc, sector, segment and annulus measures. Use a central angle from zero to one full turn.

Use consistent units. Enter numbers without thousands separators. Invalid input clears all results.

Sector and circular segment

Ange dina värden:

0 to 360. Above 180 means the major segment.

Resultat:

Inputs and results

Choose the matching mode, then read each field label and note. Results use the same length, time, currency or quantity units as the inputs unless a label says otherwise. A negative change means a decrease.

Formula

With θ in radians: arc=rθ; sector area=r²θ/2; segment area=r²(θ-sinθ)/2; chord=2r sin(θ/2). Annulus area=π(R²-r²), total boundary=2π(R+r) for R>r.

Worked example

A radius-3 semicircle (180°) has arc 3π, sector and segment area 4.5π, chord 6, and segment perimeter 3π+6. An annulus with radii 5 and 3 has area 16π and boundary length 16π.

Limits and edge cases

The angle selects the segment, so values above 180° produce the major segment. At 360° the sector boundary is only the circumference. Zero angle is treated as an empty region. Equal annulus radii are treated as an empty region with area and boundary length zero, not a doubled limiting circle. Decimal calculations use floating-point arithmetic; displayed values are rounded to 12 significant digits. This is an educational tool, not a guarantee about investments or physical systems.

FAQ

Is angle measured at the centre?

Yes. It is the central angle subtended by the chosen arc.

Is annulus perimeter only the outer edge?

No. For a nonzero-width ring it includes both inner and outer boundaries.

Formula reference

Background mathematics. Explanation and examples on this page are independently written.