Kehl-svets under vridbelastning


Elastic two-weld-group model ONLY.

Elastic two-weld-group model ONLY: two equal parallel thin-line effective throats of length L and depth t, with centrelines at±d from the centroid. Applied force is in-plane and parallel to weld length; torque = F×perpendicular eccentricity e. J = 2t(L³/12 + Ld²), using the thin-throat idealisation and parallel-axis theorem. Ignores throat thickness in the farthest radius and local second moment; t must be small compared with L and d. Stress vectors combine at the corners; angle is reported in degrees but trig uses radians, correcting the old degree/radian error. Selected units are converted internally to SI, correcting old polar-moment units/factors. Does not model other weld layouts, out-of-plane loading, fatigue, yielding, allowable strength or welding-code compliance.

Ange dina värden:
Resultat:
degrees

About this calculator

Elastic two-weld-group model ONLY: two equal parallel thin-line effective throats of length L and depth t, with centrelines at±d from the centroid. Applied force is in-plane and parallel to weld length; torque = F×perpendicular eccentricity e. J = 2t(L³/12 + Ld²), using the thin-throat idealisation and parallel-axis theorem. Ignores throat thickness in the farthest radius and local second moment; t must be small compared with L and d. Stress vectors combine at the corners; angle is reported in degrees but trig uses radians, correcting the old degree/radian error. Selected units are converted internally to SI, correcting old polar-moment units/factors. Does not model other weld layouts, out-of-plane loading, fatigue, yielding, allowable strength or welding-code compliance.

What you need

  • Length of each weld; the unit box converts between m, mm, cm, in, ft.
  • Effective throat depth; the unit box converts between m, mm, cm, in, ft.
  • Centroid to each weld centreline; the unit box converts between m, mm, cm, in, ft.
  • Applied in-plane force parallel to weld length; the unit box converts between N, lbf (minimum 0).
  • Perpendicular force eccentricity from group centroid; the unit box converts between m, mm, cm, in, ft (minimum 0).

Formula

Uniform direct shear stress = F/(2*t*L).

Group polar second moment of throat area = 2*t*(L^3/12+L*d^2).

Farthest-point radius = sqrt((L/2)^2+d^2).

Worked example

With length of each weld 2 m, effective throat depth 10 m, centroid to each weld centreline 10 m, applied in-plane force parallel to weld length 2 N, perpendicular force eccentricity from group centroid 10 m in Two parallel thin-line weld throats mode, the calculator gives uniform direct shear stress = 0.05 Pa; group polar second moment of throat area = 4,013.33 m⁴; farthest-point radius = 10.0499 m; angle atan((L/2)/d) = 5.7106 degrees.

How to read the result

The main result is the uniform direct shear stress, shown after you click Calculate; the copy button next to it copies the value. Additional results: group polar second moment of throat area, farthest-point radius, torsional shear magnitude at farthest point.