Munstycksdimensionering
Work out orifice diameter.
Orifice flow Q = C (pi/4) d^2 sqrt(2 g h) with g = 9.80665 m/s^2, C discharge coefficient (about 0.62 for a sharp-edged orifice), h head drop in fluid-column length.
About this calculator
Orifice flow Q = C (pi/4) d^2 sqrt(2 g h) with g = 9.80665 m/s^2, C discharge coefficient (about 0.62 for a sharp-edged orifice), h head drop in fluid-column length.
It has 2 modes: Orifice diameter, Head drop. Pick the tab for the quantity you want.
What you need
- Flow rate; the unit box converts between m³/s, L/s, L/min, cm³/s, m³/h, ft³/min, ft³/s, US gal/min, UK gal/min.
- Discharge coefficient.
- Head drop; the unit box converts between m, cm, mm, in, ft, yd, km, mi.
Formula
Orifice diameter = sqrt(4*Q/(C*pi*sqrt(2*9.80665*h))).
Worked example
With flow rate 5 m³/s, discharge coefficient 10, head drop 10 m in Orifice diameter mode, the calculator gives orifice diameter = 0.2132 m.
How to read the result
The main result is the orifice diameter, shown after you click Calculate; the copy button next to it copies the value.