反相运放电阻


Designs Vout = −|gain| × V1 + offset from V2 (V2 feeds the + input through the Rb/Rg divider).

设计 Vout = −|gain| × V1 + 来自 V2 的偏移(V2 通过 Rb/Rg 分压器馈入 + 输入端)。Rb 设为等于 Ra。

请输入数值:
V/V
结果:

About this calculator

Designs Vout = −|gain| × V1 + offset from V2 (V2 feeds the + input through the Rb/Rg divider). Rb is set equal to Ra.

What you need

  • Wanted output voltage Vout; the unit box converts between mV, V, kV.
  • Gain magnitude |A| in V/V.
  • Ra (input resistor); the unit box converts between Ω, kΩ, MΩ.
  • Input voltage V1; the unit box converts between mV, V, kV.
  • Offset voltage V2; the unit box converts between mV, V, kV.

Formula

Rf = rf.

Rb = ra.

Rg = if(k>0, if(k<1, ra*k/(1-k), 0/0), 0/0).

Where rf = a*ra; k = (vout + a*v1)*ra/((ra+rf)*v2).

Worked example

With wanted output voltage Vout 10 V, gain magnitude |A| 10 V/V, ra (input resistor) 10 kΩ, input voltage V1 10 V, offset voltage V2 10 V, the calculator gives rf = 100 kΩ; rb = 10 kΩ.

How to read the result

The main result is the rf, shown after you click Calculate; the copy button next to it copies the value. Additional results: rb, rg.