Asphalt Calculator (Tons for Driveways and Paving)


Hot-mix asphalt tonnage for driveways and paving from the paved area and compacted thickness, using the standard 145 lb/ft³ compacted density, with an optional cost estimate per ton.

Enter the paved area and the compacted thickness.

Enter your values:
Results:

How it works

Weight = length × width × compacted thickness × 145 lb/ft³, divided by 2,000 for short tons. Use the compacted thickness - loose asphalt compacts roughly 20-25%.

  • Typical compacted thickness: 2-3 in for residential driveways (over a compacted granular base), 3-4 in for heavier vehicles.
  • 145 lb/ft³ (about 2.03 short tons per cubic yard) is the standard figure for hot-mix; porous and cold mixes differ.
  • Contractors quote by the ton or by the square (100 ft²); 1 ton covers roughly 80 ft² at 3 in compacted.

Add 5-10% for edges, joints and irregular areas. Confirm thickness and mix design with the paving contractor.