Rebar Calculator (Weight, Count and Spacing)


Reinforcing bar weight from bar size, length and quantity, or a full grid take-off from slab dimensions and spacing, covering metric (6-32 mm) and US (#3-#8) bar sizes with an optional cost per kg.

Pick a mode: weigh bars you have, or lay out a grid.

Weight from size × length

Enter your values:
Results:

How it works

Weight mode multiplies bar length × quantity × the bar's unit weight (d²/162 kg per m for metric bars, ASTM table values for #3-#8). Grid mode lays bars both ways: bars = floor(span ÷ spacing) + 1 in each direction.

  • Grid bar lengths equal the slab dimension - subtract cover (typically 20-75 mm) in the field and add lap lengths (commonly 40-60 bar diameters) where bars join.
  • Stock lengths are 12 m (India) or 20/40/60 ft (US); the pieces figure divides total length by the stock length.
  • Unit weights: 12 mm = 0.888 kg/m, 16 mm = 1.58, 20 mm = 2.47; #4 = 0.668 lb/ft, #5 = 1.043 lb/ft.

Estimates for ordering. Bar layout, laps, hooks and development lengths come from the structural drawings, not this tool.