Roofing Shingles Calculator (Squares, Bundles, Underlayment)


Roofing material for a pitched roof from the building footprint and roof pitch: roof area, squares, shingle bundles and underlayment rolls, with waste and an optional cost per bundle.

Enter the building footprint (not the roof surface) and the pitch.

Enter your values:
Results:

How it works

Roof area = footprint area × the pitch factor (the slope length per foot of run). A square is 100 ft²; standard 3-tab and architectural shingles come 3 bundles to the square.

  • Pitch factors: 4/12 = 1.054, 6/12 = 1.118, 8/12 = 1.202, 12/12 = 1.414. Measure pitch with a level and tape at the eave.
  • Waste: 10% for simple gable roofs, 15% for hips, valleys and dormers. Starter strip and ridge cap add roughly a bundle per 60-80 linear ft.
  • Underlayment: a roll of #15 felt covers about 400 ft²; synthetic rolls about 1,000 ft².

This counts field shingles only. Drip edge, flashing, ice-and-water shield, vents and nails are separate line items on the roofer's take-off.