| Non-ferrous Light Alloy | ||||
|---|---|---|---|---|
Sr. No. | Alloy Group | Constituents approximate percent | Properties | Uses |
| 1 | Brass | Copper - 4.5 Manganese - 0.7 Magnesium - 0.7 silicon - 0.7 Aluminium remainder | Having light weight, one third that of steel. Strong like mild steel. Can be heat treated and age-hardened. | Aircraft sheets, engines and airframe structural parts rivets, tubes etc. |
| 2 | Alclad | It is a duralumin sheet but having coating of pure aluminium on each side. | Having all the properties of duralumin with the resistance to corrosion of aluminium. | Aircraft sheets and wing coverings. |
| 3 | Y-alloy | Copper - 4 Nickel - 2 Magnesium - 1.5 Aluminium remainder | Resistant to corrosion and fatigue. Withstands relatively high temperatures. Can be heat treated and age-hardened. | Used for making pistons and cylinder heads. |
| 4 | Hiduminium | Copper - 2.5 Nickel - 1.5 Iron - 1.5 Magnesium - 1.2 Silicon - 1.0 Aluminium remainder | Strong as mild steel. Can be heat treated and age-hardened at low temperatures. | Used for making air-craft structural parts, pistons, cylinder heads etc. |
| 5 | Aluminium bronze | Copper - 90 Aluminium - 10 | It is a copper-aluminium alloy having high strength. | Used for diecasting and pump-rods also in place of steel for non-sparking chisels. |
| Non-ferrous Heavy Alloys | ||||
|---|---|---|---|---|
Sr. No. | Alloy Name | Constituents approximate percent | Properties | Uses |
| 1 | Brass | Copper 70 Zinc - 30 | Good wearing, antifriction, corrosion resistant. | Used for making pipe fittings, tubing, filter, gauges, bearing bushes etc. |
| 2 | Bronze | Copper - 95 Tin - 5 | Good wearing, antifriction, corrosion resistant. | Used for making bearing bushes. |
| 3 | Phospher bronze | Copper - 89 Tin - 10 Phosphorous - 1 | Has good tensile strength and resists corrosion by seawater. | Used for bearings and gears. |
| 4 | Solder | Tin - 60 Lead - 40 | Low melting point which depends upon the proportion of constituents. | Used for bearings the metal sheets. |
| 5 | White metal | Copper - 5 Tin - 85 Antimony - 10 | Tough, antifriction properties, melts at a low temperature when bearing is over-heated, and prevents seizure. | Used for making heavy duty bearings. |
| 6 | Gun metal | Copper - 88 Tin - 10 Zinc - 2 | Tough, strong and hard, suitable for sound castings. | Used for making bearings. |
| 7 | Bell metal | Copper - 80 Tin - 20 | Hard and brittle. | Used for making bells |
| 8 | Naval brass | Copper - 60 Zinc - 39 Tin - 1 | Has high strength and resists corrosion. | Used for marine and engineering castings, condenser tubes, pump parts, motor boat shaftings etc. |
| 9 | Monel metal | Nickel - 68 Copper - 29 Iron - 3 Little quantity of manganese silicon and carbon | High corrosion resistance, excellent mechanical properties. | Used for condenser tubes propellers, pump fittings, turbine blades and chemical and food-handling plants. |