Plastic Moisture Content Calculator
Moisture content of a resin sample from its mass before and after drying, on a wet basis or a dry basis.
Weigh the sample before and after the drying procedure, then pick the basis.
How it works
Wet basis: moisture % = (wet mass − dry mass) / wet mass × 100. Dry basis: moisture % = (wet mass − dry mass) / dry mass × 100.
- State the drying method, temperature and time, and the balance resolution. Some polymers oxidise or degrade if dried incorrectly.
- Never mix wet-basis and dry-basis percentages in one report - label the basis. Wet and dry basis give different numbers for the same sample.
- For resin acceptance, follow the supplier's drying data and the applicable test method.
Mass-loss calculation; test-method dependent.