Plastic Moisture Content Calculator


Moisture content of a resin sample from its mass before and after drying, on a wet basis or a dry basis.

Weigh the sample before and after the drying procedure, then pick the basis.

Wet basis

Enter your values:
g
g
Results:
%

How it works

Wet basis: moisture % = (wet mass − dry mass) / wet mass × 100. Dry basis: moisture % = (wet mass − dry mass) / dry mass × 100.

  • State the drying method, temperature and time, and the balance resolution. Some polymers oxidise or degrade if dried incorrectly.
  • Never mix wet-basis and dry-basis percentages in one report - label the basis. Wet and dry basis give different numbers for the same sample.
  • For resin acceptance, follow the supplier's drying data and the applicable test method.

Mass-loss calculation; test-method dependent.