ثابت النابض
Original estimate k = Gd⁴/[8(Do−d)³n], using fixed shear modulus G = 11,500,000 psi.
Original estimate k = Gd⁴/[8(Do−d)³n], using fixed shear modulus G = 11,500,000 psi. That is a material assumption, not valid for every spring. Do is outside diameter and Do−d is mean coil diameter; n is active coils. Output uses force units lbf/in or kgf/mm where selected, correcting the old mass labels and rounded 55.9 conversion. For another modulus use the Helical Spring calculator. No fatigue, buckling, solid-height or load-capacity check is made.
About this calculator
Original estimate k = Gd⁴/[8(Do−d)³n], using fixed shear modulus G = 11,500,000 psi. That is a material assumption, not valid for every spring. Do is outside diameter and Do−d is mean coil diameter; n is active coils. Output uses force units lbf/in or kgf/mm where selected, correcting the old mass labels and rounded 55.9 conversion. For another modulus use the Helical Spring calculator. No fatigue, buckling, solid-height or load-capacity check is made.
What you need
- Wire diameter; the unit box converts between m, cm, mm, in, ft.
- Outside coil diameter; the unit box converts between m, cm, mm, in, ft.
- Active coils.
Formula
Mean coil diameter = Do-d.
Estimated spring rate = (11500000*6894.757293168)*d^4/(8*(Do-d)^3*n).
Worked example
With wire diameter 2 m, outside coil diameter 2 m, active coils 10 in Original steel-modulus estimate mode, the calculator gives mean coil diameter = 0 m.
How to read the result
The main result is the mean coil diameter, shown after you click Calculate; the copy button next to it copies the value. Additional results: estimated spring rate.