Induktivität einer Luftspule


Find the inductance of a single-layer air core coil from its diameter, winding length and number of turns.

Geben Sie Werte ein und klicken Sie auf Berechnen. Die Ergebnisse erscheinen unten.

Geben Sie Ihre Werte ein:
Ergebnisse:

About this calculator

A single-layer air core coil (a solenoid with no magnetic core) is one of the most common inductors in RF and high-frequency circuits, because an air core adds no losses or saturation. Its inductance depends only on the geometry: coil diameter, winding length and number of turns.

What you need

  • Coil diameter - the diameter of the winding, measured across the coil; the unit box converts between mm, cm, m, in and ft.
  • Coil length - the length of the wound part of the coil, not the wire length.
  • Number of turns - the count of complete turns in the single layer.

Formula

Wheeler's formula for a single-layer coil: L (µH) = d²n² / (18d + 40l), with coil diameter d and winding length l in inches and n the number of turns.

Worked example

A coil 1 inch in diameter, 1 inch long, with 10 turns: L = 1² × 10² / (18 × 1 + 40 × 1) = 100 / 58 ≈ 1.72 µH.

How to read the result

The result is the coil's inductance, shown in µH by default; the unit box converts to nH, mH or H. For a single-layer coil the formula is accurate to about 1% when the winding length is at least 0.4 times the diameter.

Limitations

The formula assumes a single layer of closely wound turns with an air (or plastic former) core. Multi-layer windings, widely spaced turns and coils on ferrite or iron cores need different formulas.