Inductance d'une bobine à air
Find the inductance of a single-layer air core coil from its diameter, winding length and number of turns.
Saisissez les valeurs et cliquez sur Calculer. Les résultats s’affichent ci-dessous.
About this calculator
A single-layer air core coil (a solenoid with no magnetic core) is one of the most common inductors in RF and high-frequency circuits, because an air core adds no losses or saturation. Its inductance depends only on the geometry: coil diameter, winding length and number of turns.
What you need
- Coil diameter - the diameter of the winding, measured across the coil; the unit box converts between mm, cm, m, in and ft.
- Coil length - the length of the wound part of the coil, not the wire length.
- Number of turns - the count of complete turns in the single layer.
Formula
Wheeler's formula for a single-layer coil: L (µH) = d²n² / (18d + 40l), with coil diameter d and winding length l in inches and n the number of turns.
Worked example
A coil 1 inch in diameter, 1 inch long, with 10 turns: L = 1² × 10² / (18 × 1 + 40 × 1) = 100 / 58 ≈ 1.72 µH.
How to read the result
The result is the coil's inductance, shown in µH by default; the unit box converts to nH, mH or H. For a single-layer coil the formula is accurate to about 1% when the winding length is at least 0.4 times the diameter.
Limitations
The formula assumes a single layer of closely wound turns with an air (or plastic former) core. Multi-layer windings, widely spaced turns and coils on ferrite or iron cores need different formulas.