Injection Molding Shot Weight Calculator


Work out the total shot weight - all cavities plus the runner and sprue - and how much of the machine's rated shot capacity that shot uses.

Enter the part weight, number of cavities and the feed-system weight. Add the machine's rated shot capacity to see utilisation.

Geben Sie Ihre Werte ein:

For utilisation %. Correct for resin density if the rating is quoted in PS.

Ergebnisse:
%

How it works

Shot weight = number of cavities × part weight + runner weight + sprue weight. Shot utilisation is the shot weight divided by the machine's rated usable shot capacity, as a percentage.

  • Part weight should be measured, or calculated from CAD volume × resin density (try the Plastic Part Weight Calculator).
  • Rated shot capacity is often quoted in a reference resin (usually GPPS). Correct for your resin's density following the machine maker's guidance.
  • Check both the shot mass and the machine's plasticising capacity. Most molders aim to use roughly 25-80% of rated capacity per shot.

Mass balance per LANXESS processing data and machine manufacturer specifications.