Injection Molding Shot Weight Calculator
Work out the total shot weight - all cavities plus the runner and sprue - and how much of the machine's rated shot capacity that shot uses.
Enter the part weight, number of cavities and the feed-system weight. Add the machine's rated shot capacity to see utilisation.
How it works
Shot weight = number of cavities × part weight + runner weight + sprue weight. Shot utilisation is the shot weight divided by the machine's rated usable shot capacity, as a percentage.
- Part weight should be measured, or calculated from CAD volume × resin density (try the Plastic Part Weight Calculator).
- Rated shot capacity is often quoted in a reference resin (usually GPPS). Correct for your resin's density following the machine maker's guidance.
- Check both the shot mass and the machine's plasticising capacity. Most molders aim to use roughly 25-80% of rated capacity per shot.
Mass balance per LANXESS processing data and machine manufacturer specifications.