Fräsbearbeitung
Original milling travel estimates, with all lengths made explicit and converted consistently to mm.
Original milling travel estimates, with all lengths made explicit and converted consistently to mm. Peripheral approach = √(Dd−d²), using 5 mm assumed over-run. Facing over-run = [D−√(D²−w²)]/2 for D≥w; for D<w the original assumptions are approach D/2 and over-run 7 mm. For D≥w no separate facing approach is specified here: zero is a placeholder, not a required machine setup. Enter the actual approach and over-run explicitly in the time mode. Feed/rev = feed/tooth × teeth; single-cut time uses tooth feed × teeth × rpm, whereas total time uses the separately entered table feed. These feeds should agree for a consistent setup. Estimates exclude tool changes, handling, acceleration and return travel.
About this calculator
Original milling travel estimates, with all lengths made explicit and converted consistently to mm. Peripheral approach = √(Dd−d²), using 5 mm assumed over-run. Facing over-run = [D−√(D²−w²)]/2 for D≥w; for D<w the original assumptions are approach D/2 and over-run 7 mm. For D≥w no separate facing approach is specified here: zero is a placeholder, not a required machine setup. Enter the actual approach and over-run explicitly in the time mode. Feed/rev = feed/tooth × teeth; single-cut time uses tooth feed × teeth × rpm, whereas total time uses the separately entered table feed. These feeds should agree for a consistent setup. Estimates exclude tool changes, handling, acceleration and return travel.
It has 3 modes: Peripheral-cut approach, Facing over-run, Milling travel and time. Pick the tab for the quantity you want.
What you need
- Cutter diameter; the unit box converts between mm, cm, m, in.
- Depth of cut; the unit box converts between mm, cm, m, in (minimum 0).
Formula
Approach length = sqrt(D*d-d^2).
Assumed over-run = 5.
Worked example
With cutter diameter 2 mm, depth of cut 10 mm in Peripheral-cut approach mode, the calculator gives assumed over-run = 5 mm.
How to read the result
The main result is the approach length, shown after you click Calculate; the copy button next to it copies the value. Additional results: assumed over-run.