Débit d'huile critique
Work out estimated critical oil rate.
Original Mayer–Garder-style gas-coning estimate Qoc = 0.246×10⁻⁴(ρo−ρg)ko(h²−hp²)/[μoBo ln(re/rw)] with petroleum field units internally; selected metric values are converted before calculation. The numerical coefficient is unit-specific. Assumes the original idealized isotropic reservoir and bottom perforation configuration. This historical screening estimate is not a production recommendation, validated reservoir simulation or well-operating limit.
About this calculator
Original Mayer–Garder-style gas-coning estimate Qoc = 0.246×10⁻⁴(ρo−ρg)ko(h²−hp²)/[μoBo ln(re/rw)] with petroleum field units internally; selected metric values are converted before calculation. The numerical coefficient is unit-specific. Assumes the original idealized isotropic reservoir and bottom perforation configuration. This historical screening estimate is not a production recommendation, validated reservoir simulation or well-operating limit.
What you need
- Oil density; the unit box converts between lb/ft³, kg/m³.
- Gas density; the unit box converts between lb/ft³, kg/m³ (minimum 0).
- Well drainage radius; the unit box converts between ft, m, in, mm.
- Wellbore radius; the unit box converts between ft, m, in, mm.
- Effective oil permeability in mD (minimum 0).
- Oil viscosity in cP.
- Oil formation volume factor in reservoir bbl/STB.
- Oil-column thickness; the unit box converts between ft, m, in, mm.
- Perforated interval; the unit box converts between ft, m, in, mm (minimum 0).
Formula
Estimated critical oil rate = 0.246e-4*(oil-gas)*k*(h^2-hp^2)/(ln(re/rw)*mu*B).
How to read the result
The main result is the estimated critical oil rate, shown after you click Calculate; the copy button next to it copies the value.