Kritiskt oljeflöde


Work out estimated critical oil rate.

Original Mayer–Garder-style gas-coning estimate Qoc = 0.246×10⁻⁴(ρo−ρg)ko(h²−hp²)/[μoBo ln(re/rw)] with petroleum field units internally; selected metric values are converted before calculation. The numerical coefficient is unit-specific. Assumes the original idealized isotropic reservoir and bottom perforation configuration. This historical screening estimate is not a production recommendation, validated reservoir simulation or well-operating limit.

Ange dina värden:
mD
cP
reservoir bbl/STB
Resultat:

About this calculator

Original Mayer–Garder-style gas-coning estimate Qoc = 0.246×10⁻⁴(ρo−ρg)ko(h²−hp²)/[μoBo ln(re/rw)] with petroleum field units internally; selected metric values are converted before calculation. The numerical coefficient is unit-specific. Assumes the original idealized isotropic reservoir and bottom perforation configuration. This historical screening estimate is not a production recommendation, validated reservoir simulation or well-operating limit.

What you need

  • Oil density; the unit box converts between lb/ft³, kg/m³.
  • Gas density; the unit box converts between lb/ft³, kg/m³ (minimum 0).
  • Well drainage radius; the unit box converts between ft, m, in, mm.
  • Wellbore radius; the unit box converts between ft, m, in, mm.
  • Effective oil permeability in mD (minimum 0).
  • Oil viscosity in cP.
  • Oil formation volume factor in reservoir bbl/STB.
  • Oil-column thickness; the unit box converts between ft, m, in, mm.
  • Perforated interval; the unit box converts between ft, m, in, mm (minimum 0).

Formula

Estimated critical oil rate = 0.246e-4*(oil-gas)*k*(h^2-hp^2)/(ln(re/rw)*mu*B).

How to read the result

The main result is the estimated critical oil rate, shown after you click Calculate; the copy button next to it copies the value.