Niveau 9


31 reviewed questions. Choose answers, then Calculate. Clear resets all selections. Unanswered questions score zero and remain in the percentage denominator. Open the answer review below for sources.

Saisissez vos valeurs :
Résultats :
%

Answers and sources

Reviewed 17 November 2026. Ambiguous, malformed and unverified legacy questions have been removed. Wording and answer choices have been corrected where needed. This is a study quiz, not certification of engineering or laboratory decisions.

Question 1: answer and source

In a mercury arc rectifier

Answer: Ion stream moves from anode to cathode

Positive mercury ions drift toward the cathode spot; conventional current flows anode to cathode externally but electrons move cathode to anode internally; key unchanged.

Question 2: answer and source

For producing cathode spot in a mercury arc rectifier

Answer: An auxiliary electrode is used

An igniter/auxiliary electrode dipped into the mercury initiates the cathode spot; legacy keyed 'Anode is heated'.

Question 3: answer and source

If the voltage of anode B is raised to 510 V

Answer: Anode B will conduct but anode A will also continue to conduct

Once the arc is established the ionized path keeps the previously conducting anode alive, so both conduct; key unchanged.

Question 4: answer and source

Ripple frequency of full wave rectifier working on 50 Hz supply will be

Answer: 100 Hz

Full-wave rectification doubles the supply frequency: 2 x 50 = 100 Hz. The legacy option list was mangled (options from another question) and lacked 100 Hz; options repaired.

Question 5: answer and source

The form factor for half-wave rectifier sine wave is

Answer: 1.57

Half-wave form factor = (Vm/2)/(Vm/pi) = pi/2 = 1.57; key unchanged.

Question 6: answer and source

A silicon controlled rectifier is a

Answer: Device with three junctions

An SCR has four layers (PNPN) forming three junctions; key unchanged.

Question 7: answer and source

For full-wave rectifier sine wave, form factor is

Answer: 1.11

Full-wave form factor = (Vm/Sqrt(2))/(2Vm/pi) = pi/(2 Sqrt(2)) = 1.11; key unchanged.

Question 8: answer and source

At absolute zero temperature a semi-conductor behaves as

Answer: An Insulator

At 0 K all electrons are bound in the valence band, so the semiconductor behaves as an insulator; key unchanged.

Question 9: answer and source

An electron in the conduction band

Answer: Has higher energy than the electron in the valence band

The conduction band lies above the valence band; key unchanged.

Question 10: answer and source

EG for silicon is 1.12 eV and for germanium is 0.72 eV thus it can be concluded that

Answer: Less number of electron hole pairs will be generated in silicon than in germanium at room temperature

A larger band gap means fewer thermally generated pairs, so silicon generates fewer than germanium; key unchanged. Fixed misprint 'conducted'.

Question 11: answer and source

Before doping semiconductor material is generally

Answer: Purified

Semiconductors are purified to very high purity before controlled doping; key unchanged.

Question 12: answer and source

Select the one that is a acceptor impurity element

Answer: Gallium

Gallium is trivalent (acceptor); antimony, arsenic and phosphorus are pentavalent donors; key unchanged.

Question 13: answer and source

At room temperature when a voltage is applied to an intrinsic semiconductor

Answer: Electrons move towards positive terminal and holes towards negative terminal

Electrons drift toward the positive terminal, holes toward the negative; key unchanged.

Question 14: answer and source

Under which of the following conditions avalanche breakdown in a semiconductor diode takes place ?

Answer: When reverse bias exceeds a certain value

Avalanche breakdown occurs under high reverse bias; key unchanged.

Question 15: answer and source

Select the rectifier that needs four diodes

Answer: Bridge rectifier

The bridge rectifier uses four diodes; key unchanged.

Question 16: answer and source

Maximum forward current in case of signal diode is in the range of

Answer: Few milli amperes

Small signal diodes carry only a few milliamperes (power diodes carry amperes); key unchanged.

Question 17: answer and source

In a semiconductor avalanche breakdown takes place when

Answer: Reverse bias exceeds the limiting value

Carrier multiplication starts when reverse bias exceeds the breakdown value; key unchanged.

Question 18: answer and source

The D.C output voltage from a power supply

Answer: Increases with higher values of filter capacitance and decreases with more load current

More capacitance smooths and raises the DC level; more load current drags it down; key unchanged.

Question 19: answer and source

A solar cell provides a example of

Answer: Photo Voltaic Cell

A solar cell converts light directly to voltage: photovoltaic; key unchanged.

Question 20: answer and source

When yellow light is incident on a surface, no electrons are emitted while green light can emit. If red light is incident on the surface, then it is expected that

Answer: No electrons are emitted

Red light has a lower photon energy than yellow, which already fails to emit; key unchanged. Fixed misprint 'Hotons'.

Question 21: answer and source

An ideal diode should have

Answer: Zero resistance in the forward bias and an infinitely large resistance in reverse bias

Ideal diode: short when forward biased, open when reverse biased; key unchanged. Fixed misprint 'bais'.

Question 22: answer and source

The reverse resistance of a PN juction diode

Answer: Is given by breakdown voltage / reverse leakage current

Reverse resistance is quantified as breakdown voltage divided by reverse leakage current; key unchanged.

Question 23: answer and source

In which case the temperature coefficient is positive

Answer: Extrinsic Semi-Conductor

In the exhaustion range an extrinsic semiconductor's resistance rises with temperature (mobility falls); key unchanged.

Question 24: answer and source

A PNP transistor is generally made of

Answer: Either silicon or germanium

Both silicon and germanium PNP transistors exist; key unchanged.

Question 25: answer and source

In a transistor the region that is very lightly doped and is very thin is

Answer: Base

The base is thin and lightly doped so few carriers recombine there; key unchanged.

Question 26: answer and source

In a NPN transistor, when emitter junction is forward biased and collector junction is reverse biased, the transistor will operate in

Answer: Active Region

Forward-active region: emitter junction forward, collector junction reverse; key unchanged. Fixed misprint 'transitor'.

Question 27: answer and source

A transistor will operate in inverted region if

Answer: Emitter junction is reverse biased and collector junction is forward biased

Inverted (reverse-active) mode swaps the junction biases; key unchanged.

Question 28: answer and source

Which of the following is essential for transistor action ?

Answer: The base region must be very narrow

A very narrow base lets carriers diffuse through to the collector; key unchanged.

Question 29: answer and source

In a transistor, current ICBO flows when

Answer: Some D.C voltage is applied in the reverse direction to the collector junction with the emitter open circuited

ICBO is the collector-base reverse saturation current with the emitter open; key unchanged.

Question 30: answer and source

The current Icbo

Answer: Increases with increase in temperature

Icbo roughly doubles every 10 degrees C; key unchanged.

Question 31: answer and source

Thermal runaway of a transistor occurs when

Answer: There is excessive leakage current due to temperature rise

Rising temperature raises leakage current, which raises dissipation and temperature further; key unchanged. Fixed misprints 'runway'/'joints'.

Change log: 17 November 2026

Original question numbers and review decisions
  • Original Q1: verified as keyed. Positive mercury ions drift toward the cathode spot; conventional current flows anode to cathode externally but electrons move cathode to anode internally; key unchanged.
  • Original Q2: verified as keyed. An igniter/auxiliary electrode dipped into the mercury initiates the cathode spot; legacy keyed 'Anode is heated'.
  • Original Q3: verified as keyed. Once the arc is established the ionized path keeps the previously conducting anode alive, so both conduct; key unchanged.
  • Original Q4: corrected. Full-wave rectification doubles the supply frequency: 2 x 50 = 100 Hz. The legacy option list was mangled (options from another question) and lacked 100 Hz; options repaired.
  • Original Q5: verified as keyed. Half-wave form factor = (Vm/2)/(Vm/pi) = pi/2 = 1.57; key unchanged.
  • Original Q6: verified as keyed. An SCR has four layers (PNPN) forming three junctions; key unchanged.
  • Original Q7: verified as keyed. Full-wave form factor = (Vm/Sqrt(2))/(2Vm/pi) = pi/(2 Sqrt(2)) = 1.11; key unchanged.
  • Original Q8: verified as keyed. At 0 K all electrons are bound in the valence band, so the semiconductor behaves as an insulator; key unchanged.
  • Original Q9: verified as keyed. The conduction band lies above the valence band; key unchanged.
  • Original Q10: verified as keyed. A larger band gap means fewer thermally generated pairs, so silicon generates fewer than germanium; key unchanged. Fixed misprint 'conducted'.
  • Original Q11: verified as keyed. Semiconductors are purified to very high purity before controlled doping; key unchanged.
  • Original Q12: verified as keyed. Gallium is trivalent (acceptor); antimony, arsenic and phosphorus are pentavalent donors; key unchanged.
  • Original Q13: verified as keyed. Electrons drift toward the positive terminal, holes toward the negative; key unchanged.
  • Original Q14: verified as keyed. Avalanche breakdown occurs under high reverse bias; key unchanged.
  • Original Q15: verified as keyed. The bridge rectifier uses four diodes; key unchanged.
  • Original Q16: verified as keyed. Small signal diodes carry only a few milliamperes (power diodes carry amperes); key unchanged.
  • Original Q17: verified as keyed. Carrier multiplication starts when reverse bias exceeds the breakdown value; key unchanged.
  • Original Q18: verified as keyed. More capacitance smooths and raises the DC level; more load current drags it down; key unchanged.
  • Original Q19: verified as keyed. A solar cell converts light directly to voltage: photovoltaic; key unchanged.
  • Original Q20: verified as keyed. Red light has a lower photon energy than yellow, which already fails to emit; key unchanged. Fixed misprint 'Hotons'.
  • Original Q21: verified as keyed. Ideal diode: short when forward biased, open when reverse biased; key unchanged. Fixed misprint 'bais'.
  • Original Q22: verified as keyed. Reverse resistance is quantified as breakdown voltage divided by reverse leakage current; key unchanged.
  • Original Q23: verified as keyed. In the exhaustion range an extrinsic semiconductor's resistance rises with temperature (mobility falls); key unchanged.
  • Original Q24: verified as keyed. Both silicon and germanium PNP transistors exist; key unchanged.
  • Original Q25: verified as keyed. The base is thin and lightly doped so few carriers recombine there; key unchanged.
  • Original Q26: verified as keyed. Forward-active region: emitter junction forward, collector junction reverse; key unchanged. Fixed misprint 'transitor'.
  • Original Q27: verified as keyed. Inverted (reverse-active) mode swaps the junction biases; key unchanged.
  • Original Q28: verified as keyed. A very narrow base lets carriers diffuse through to the collector; key unchanged.
  • Original Q29: verified as keyed. ICBO is the collector-base reverse saturation current with the emitter open; key unchanged.
  • Original Q30: verified as keyed. Icbo roughly doubles every 10 degrees C; key unchanged.
  • Original Q31: verified as keyed. Rising temperature raises leakage current, which raises dissipation and temperature further; key unchanged. Fixed misprints 'runway'/'joints'.