Stufe 9


31 reviewed questions. Choose answers, then Calculate. Clear resets all selections. Unanswered questions score zero and remain in the percentage denominator. Open the answer review below for sources.

Geben Sie Ihre Werte ein:
Ergebnisse:
%

Answers and sources

Reviewed 17 November 2026. Ambiguous, malformed and unverified legacy questions have been removed. Wording and answer choices have been corrected where needed. This is a study quiz, not certification of engineering or laboratory decisions.

Question 1: answer and source

In a mercury arc rectifier

Answer: Ion stream moves from anode to cathode

Positive mercury ions drift toward the cathode spot; conventional current flows anode to cathode externally but electrons move cathode to anode internally; key unchanged.

Question 2: answer and source

For producing cathode spot in a mercury arc rectifier

Answer: An auxiliary electrode is used

An igniter/auxiliary electrode dipped into the mercury initiates the cathode spot; legacy keyed 'Anode is heated'.

Question 3: answer and source

If the voltage of anode B is raised to 510 V

Answer: Anode B will conduct but anode A will also continue to conduct

Once the arc is established the ionized path keeps the previously conducting anode alive, so both conduct; key unchanged.

Question 4: answer and source

Ripple frequency of full wave rectifier working on 50 Hz supply will be

Answer: 100 Hz

Full-wave rectification doubles the supply frequency: 2 x 50 = 100 Hz. The legacy option list was mangled (options from another question) and lacked 100 Hz; options repaired.

Question 5: answer and source

The form factor for half-wave rectifier sine wave is

Answer: 1.57

Half-wave form factor = (Vm/2)/(Vm/pi) = pi/2 = 1.57; key unchanged.

Question 6: answer and source

A silicon controlled rectifier is a

Answer: Device with three junctions

An SCR has four layers (PNPN) forming three junctions; key unchanged.

Question 7: answer and source

For full-wave rectifier sine wave, form factor is

Answer: 1.11

Full-wave form factor = (Vm/Sqrt(2))/(2Vm/pi) = pi/(2 Sqrt(2)) = 1.11; key unchanged.

Question 8: answer and source

At absolute zero temperature a semi-conductor behaves as

Answer: An Insulator

At 0 K all electrons are bound in the valence band, so the semiconductor behaves as an insulator; key unchanged.

Question 9: answer and source

An electron in the conduction band

Answer: Has higher energy than the electron in the valence band

The conduction band lies above the valence band; key unchanged.

Question 10: answer and source

EG for silicon is 1.12 eV and for germanium is 0.72 eV thus it can be concluded that

Answer: Less number of electron hole pairs will be generated in silicon than in germanium at room temperature

A larger band gap means fewer thermally generated pairs, so silicon generates fewer than germanium; key unchanged. Fixed misprint 'conducted'.

Question 11: answer and source

Before doping semiconductor material is generally

Answer: Purified

Semiconductors are purified to very high purity before controlled doping; key unchanged.

Question 12: answer and source

Select the one that is a acceptor impurity element

Answer: Gallium

Gallium is trivalent (acceptor); antimony, arsenic and phosphorus are pentavalent donors; key unchanged.

Question 13: answer and source

At room temperature when a voltage is applied to an intrinsic semiconductor

Answer: Electrons move towards positive terminal and holes towards negative terminal

Electrons drift toward the positive terminal, holes toward the negative; key unchanged.

Question 14: answer and source

Under which of the following conditions avalanche breakdown in a semiconductor diode takes place ?

Answer: When reverse bias exceeds a certain value

Avalanche breakdown occurs under high reverse bias; key unchanged.

Question 15: answer and source

Select the rectifier that needs four diodes

Answer: Bridge rectifier

The bridge rectifier uses four diodes; key unchanged.

Question 16: answer and source

Maximum forward current in case of signal diode is in the range of

Answer: Few milli amperes

Small signal diodes carry only a few milliamperes (power diodes carry amperes); key unchanged.

Question 17: answer and source

In a semiconductor avalanche breakdown takes place when

Answer: Reverse bias exceeds the limiting value

Carrier multiplication starts when reverse bias exceeds the breakdown value; key unchanged.

Question 18: answer and source

The D.C output voltage from a power supply

Answer: Increases with higher values of filter capacitance and decreases with more load current

More capacitance smooths and raises the DC level; more load current drags it down; key unchanged.

Question 19: answer and source

A solar cell provides a example of

Answer: Photo Voltaic Cell

A solar cell converts light directly to voltage: photovoltaic; key unchanged.

Question 20: answer and source

When yellow light is incident on a surface, no electrons are emitted while green light can emit. If red light is incident on the surface, then it is expected that

Answer: No electrons are emitted

Red light has a lower photon energy than yellow, which already fails to emit; key unchanged. Fixed misprint 'Hotons'.

Question 21: answer and source

An ideal diode should have

Answer: Zero resistance in the forward bias and an infinitely large resistance in reverse bias

Ideal diode: short when forward biased, open when reverse biased; key unchanged. Fixed misprint 'bais'.

Question 22: answer and source

The reverse resistance of a PN juction diode

Answer: Is given by breakdown voltage / reverse leakage current

Reverse resistance is quantified as breakdown voltage divided by reverse leakage current; key unchanged.

Question 23: answer and source

In which case the temperature coefficient is positive

Answer: Extrinsic Semi-Conductor

In the exhaustion range an extrinsic semiconductor's resistance rises with temperature (mobility falls); key unchanged.

Question 24: answer and source

A PNP transistor is generally made of

Answer: Either silicon or germanium

Both silicon and germanium PNP transistors exist; key unchanged.

Question 25: answer and source

In a transistor the region that is very lightly doped and is very thin is

Answer: Base

The base is thin and lightly doped so few carriers recombine there; key unchanged.

Question 26: answer and source

In a NPN transistor, when emitter junction is forward biased and collector junction is reverse biased, the transistor will operate in

Answer: Active Region

Forward-active region: emitter junction forward, collector junction reverse; key unchanged. Fixed misprint 'transitor'.

Question 27: answer and source

A transistor will operate in inverted region if

Answer: Emitter junction is reverse biased and collector junction is forward biased

Inverted (reverse-active) mode swaps the junction biases; key unchanged.

Question 28: answer and source

Which of the following is essential for transistor action ?

Answer: The base region must be very narrow

A very narrow base lets carriers diffuse through to the collector; key unchanged.

Question 29: answer and source

In a transistor, current ICBO flows when

Answer: Some D.C voltage is applied in the reverse direction to the collector junction with the emitter open circuited

ICBO is the collector-base reverse saturation current with the emitter open; key unchanged.

Question 30: answer and source

The current Icbo

Answer: Increases with increase in temperature

Icbo roughly doubles every 10 degrees C; key unchanged.

Question 31: answer and source

Thermal runaway of a transistor occurs when

Answer: There is excessive leakage current due to temperature rise

Rising temperature raises leakage current, which raises dissipation and temperature further; key unchanged. Fixed misprints 'runway'/'joints'.

Change log: 17 November 2026

Original question numbers and review decisions
  • Original Q1: verified as keyed. Positive mercury ions drift toward the cathode spot; conventional current flows anode to cathode externally but electrons move cathode to anode internally; key unchanged.
  • Original Q2: verified as keyed. An igniter/auxiliary electrode dipped into the mercury initiates the cathode spot; legacy keyed 'Anode is heated'.
  • Original Q3: verified as keyed. Once the arc is established the ionized path keeps the previously conducting anode alive, so both conduct; key unchanged.
  • Original Q4: corrected. Full-wave rectification doubles the supply frequency: 2 x 50 = 100 Hz. The legacy option list was mangled (options from another question) and lacked 100 Hz; options repaired.
  • Original Q5: verified as keyed. Half-wave form factor = (Vm/2)/(Vm/pi) = pi/2 = 1.57; key unchanged.
  • Original Q6: verified as keyed. An SCR has four layers (PNPN) forming three junctions; key unchanged.
  • Original Q7: verified as keyed. Full-wave form factor = (Vm/Sqrt(2))/(2Vm/pi) = pi/(2 Sqrt(2)) = 1.11; key unchanged.
  • Original Q8: verified as keyed. At 0 K all electrons are bound in the valence band, so the semiconductor behaves as an insulator; key unchanged.
  • Original Q9: verified as keyed. The conduction band lies above the valence band; key unchanged.
  • Original Q10: verified as keyed. A larger band gap means fewer thermally generated pairs, so silicon generates fewer than germanium; key unchanged. Fixed misprint 'conducted'.
  • Original Q11: verified as keyed. Semiconductors are purified to very high purity before controlled doping; key unchanged.
  • Original Q12: verified as keyed. Gallium is trivalent (acceptor); antimony, arsenic and phosphorus are pentavalent donors; key unchanged.
  • Original Q13: verified as keyed. Electrons drift toward the positive terminal, holes toward the negative; key unchanged.
  • Original Q14: verified as keyed. Avalanche breakdown occurs under high reverse bias; key unchanged.
  • Original Q15: verified as keyed. The bridge rectifier uses four diodes; key unchanged.
  • Original Q16: verified as keyed. Small signal diodes carry only a few milliamperes (power diodes carry amperes); key unchanged.
  • Original Q17: verified as keyed. Carrier multiplication starts when reverse bias exceeds the breakdown value; key unchanged.
  • Original Q18: verified as keyed. More capacitance smooths and raises the DC level; more load current drags it down; key unchanged.
  • Original Q19: verified as keyed. A solar cell converts light directly to voltage: photovoltaic; key unchanged.
  • Original Q20: verified as keyed. Red light has a lower photon energy than yellow, which already fails to emit; key unchanged. Fixed misprint 'Hotons'.
  • Original Q21: verified as keyed. Ideal diode: short when forward biased, open when reverse biased; key unchanged. Fixed misprint 'bais'.
  • Original Q22: verified as keyed. Reverse resistance is quantified as breakdown voltage divided by reverse leakage current; key unchanged.
  • Original Q23: verified as keyed. In the exhaustion range an extrinsic semiconductor's resistance rises with temperature (mobility falls); key unchanged.
  • Original Q24: verified as keyed. Both silicon and germanium PNP transistors exist; key unchanged.
  • Original Q25: verified as keyed. The base is thin and lightly doped so few carriers recombine there; key unchanged.
  • Original Q26: verified as keyed. Forward-active region: emitter junction forward, collector junction reverse; key unchanged. Fixed misprint 'transitor'.
  • Original Q27: verified as keyed. Inverted (reverse-active) mode swaps the junction biases; key unchanged.
  • Original Q28: verified as keyed. A very narrow base lets carriers diffuse through to the collector; key unchanged.
  • Original Q29: verified as keyed. ICBO is the collector-base reverse saturation current with the emitter open; key unchanged.
  • Original Q30: verified as keyed. Icbo roughly doubles every 10 degrees C; key unchanged.
  • Original Q31: verified as keyed. Rising temperature raises leakage current, which raises dissipation and temperature further; key unchanged. Fixed misprints 'runway'/'joints'.