Résistance des engrenages


Historical Lewis-style estimate from the original page.

Historical Lewis-style estimate from the original page: W = (S/3)bY/P × 600/(600+v), with pitch-line velocity v = πDN/12 in ft/min. Unit selectors convert inputs to US customary units internally. Diametral pitch is teeth per unit length, not metric module. Tooth factors are copied from the original select options; the unused old script array had missing/misaligned entries. The fixed factor S/3 and velocity correction are assumptions, not a current allowable-load standard. Tooth form/pressure angle and factor provenance are not established, so this is an educational legacy estimate, NOT a “maximum safe load”, gear rating or AGMA/ISO compliance check. Rack keeps the original300-tooth approximation and is not a true rack dynamic model.

Saisissez vos valeurs :
rev/min
Résultats :

About this calculator

Historical Lewis-style estimate from the original page: W = (S/3)bY/P × 600/(600+v), with pitch-line velocity v = πDN/12 in ft/min. Unit selectors convert inputs to US customary units internally. Diametral pitch is teeth per unit length, not metric module. Tooth factors are copied from the original select options; the unused old script array had missing/misaligned entries. The fixed factor S/3 and velocity correction are assumptions, not a current allowable-load standard. Tooth form/pressure angle and factor provenance are not established, so this is an educational legacy estimate, NOT a “maximum safe load”, gear rating or AGMA/ISO compliance check. Rack keeps the original300-tooth approximation and is not a true rack dynamic model.

What you need

  • Material tensile-strength input; the unit box converts between psi, kPa, MPa.
  • Face width; the unit box converts between in, mm, cm, m, ft.
  • Diametral pitch; the unit box converts between teeth/in, teeth/mm.
  • Gear speed in rev/min (minimum 0).
  • Original tooth-count / form-factor row.

Formula

Original Lewis factor = factor.

Pitch diameter = N/P.

Pitch-line speed = pi*D*rpm/12.

Where N = if(factor==0.201,10,if(factor==0.226,11,if(factor==0.245,12,if(factor==0.264,13,if(factor==0.276,14,if(factor==0.289,15,if(factor==0.295,16,if(factor==0.302,17,if(factor==0.308,18,if(factor==0.314,19,if(factor==0.32,20,if(factor==0.33,22,if(factor==0.337,24,if(factor==0.344,26,if(factor==0.352,28,if(factor==0.358,30,if(factor==0.364,32,if(factor==0.37,34,if(factor==0.377,36,if(factor==0.383,38,if(factor==0.389,40,if(factor==0.399,45,if(factor==0.408,50,if(factor==0.415,55,if(factor==0.421,60,if(factor==0.425,65,if(factor==0.429,70,if(factor==0.433,75,if(factor==0.436,80,if(factor==0.442,90,if(factor==0.446,100,if(factor==0.458,150,if(factor==0.463,200,if(factor==0.471,300,300)))))))))))))))))))))))))))))))))).

Worked example

With material tensile-strength input 10 psi, face width 2 in, diametral pitch 10 teeth/in, gear speed 10 rev/min, original tooth-count / form-factor row 10 in Historical Lewis-style running-load estimate mode, the calculator gives original Lewis factor = 10; pitch diameter = 30 in.

How to read the result

The main result is the original Lewis factor, shown after you click Calculate; the copy button next to it copies the value. Additional results: pitch diameter, pitch-line speed, historical tooth-load estimate.