Effet de la chaleur sur les céramiques
Contraction = (L1 - L2) / L1 x 100.
Contraction = (L1 - L2) / L1 x 100. Moisture content (wet basis) = (W1 - W2) / W1 x 100. Loss on ignition = (W2 - W3) / W2 x 100, relative to the dried weight W2.
About this calculator
Contraction = (L1 - L2) / L1 x 100. Moisture content (wet basis) = (W1 - W2) / W1 x 100. Loss on ignition = (W2 - W3) / W2 x 100, relative to the dried weight W2.
It has 3 modes: Contraction, Moisture content, Loss on ignition. Pick the tab for the quantity you want.
What you need
- Initial separation of test marks (L1); the unit box converts between mm, cm, m, in, ft.
- Final separation of test marks (L2); the unit box converts between mm, cm, m, in, ft (minimum 0).
Formula
Loss on ignition = (W2 - W3) / W2 x 100, relative to the dried weight W2.
Worked example
With initial separation of test marks (L1) 10 mm, final separation of test marks (L2) 10 mm in Contraction mode, the calculator gives contraction = 0 %.
How to read the result
The main result is the contraction, shown after you click Calculate; the copy button next to it copies the value.