セラミック材料への熱の影響


Contraction = (L1 - L2) / L1 x 100.

Contraction = (L1 - L2) / L1 x 100. Moisture content (wet basis) = (W1 - W2) / W1 x 100. Loss on ignition = (W2 - W3) / W2 x 100, relative to the dried weight W2.

Contraction

数値を入力:
計算結果:
%

About this calculator

Contraction = (L1 - L2) / L1 x 100. Moisture content (wet basis) = (W1 - W2) / W1 x 100. Loss on ignition = (W2 - W3) / W2 x 100, relative to the dried weight W2.

It has 3 modes: Contraction, Moisture content, Loss on ignition. Pick the tab for the quantity you want.

What you need

  • Initial separation of test marks (L1); the unit box converts between mm, cm, m, in, ft.
  • Final separation of test marks (L2); the unit box converts between mm, cm, m, in, ft (minimum 0).

Formula

Loss on ignition = (W2 - W3) / W2 x 100, relative to the dried weight W2.

Worked example

With initial separation of test marks (L1) 10 mm, final separation of test marks (L2) 10 mm in Contraction mode, the calculator gives contraction = 0 %.

How to read the result

The main result is the contraction, shown after you click Calculate; the copy button next to it copies the value.