Fatigue Damage by Miner's Rule Calculator


Cumulative fatigue damage by Miner’s rule: sum n(i)/N(i) over the stress blocks and compare against 1. The S-N curve is estimated between 10³ cycles at 0.9·S(ut) and 10⁶ cycles at the endurance limit, with an optional Goodman mean-stress correction.

Leave unused stress blocks at 0. Endurance limit defaults to 0.5·Sut.

Cumulative damage

Inserisci i valori:
Risultati:

How it works

The S-N line on log-log scales runs from (10³, 0.9·S(ut)) to (10⁶, S(e)): N(S) = 10(log S − log a)/b. Miner: D = Σ n(i)/N(i), failure conventionally at D = 1. Goodman: S(a,eq) = S(a)/(1 − S(m)/S(ut)); safety factor = 1/(S(a)/S(e) + S(m)/S(ut)).

  • Stresses below S(e) are treated as non-damaging (N = 10¹⁵, effectively infinite).
  • Real components need knockdowns on S(e) for size, surface finish, notch and reliability (Marin factors) - apply them before entering S(e).
  • Miner ignores load sequence; actual D at failure scatters from about 0.7 to 2.2, so keep design targets at D ≤ 0.3-0.5.

Screening estimate. Fatigue is scatter-prone: verify with test data or a full standard-based analysis (e.g. FKM, Eurocode 3 Part 1-9) for anything that matters.