Injection Molding Cost per Part Calculator


Unit cost of an injection moulded part: machine-time cost from the hourly rate and cycle, material cost from the shot weight and resin price, and the total per good part.

Enter the machine rate, cycle, cavities, shot weight and resin price. Currency can be anything - results use the same currency.

Inserisci i valori:

All-in machine hour rate in your currency.

s
%
Risultati:
/ part
/ part
/ part
/ 1000

How it works

Machine cost/part = machine rate per hour × cycle time (s) / (3600 × cavities). Material cost/good part = total material per cycle × resin price / good parts per cycle.

  • Enter amounts in any one currency; the results are in the same currency.
  • Shot weight should include runner and sprue - use the Shot Weight Calculator. State separately whether runner regrind is reused, sold or discarded.
  • This covers machine time and material only. Labour, overhead, energy, tooling amortisation and secondary operations are separate.

Cost model per the DFMA injection moulding cost-estimating guide; avoid double-counting downtime or yield applied elsewhere.