Resistori per amplificatore non invertente
Designs the circuit so that Vout = gain × V1 + offset from V2.
Progetta il circuito in modo che Vout = guadagno × V1 + offset da V2. Ra è posto uguale a Rg.
About this calculator
Designs the circuit so that Vout = gain × V1 + offset from V2. Ra is set equal to Rg.
What you need
- Wanted output voltage Vout; the unit box converts between mV, V, kV.
- Gain on V1 in V/V.
- Rg; the unit box converts between Ω, kΩ, MΩ.
- Input voltage V1; the unit box converts between mV, V, kV.
- Offset voltage V2; the unit box converts between mV, V, kV.
Formula
Rf = rg*(a*(ra+rb)/rb - 1).
Ra = ra.
Rb = rb.
Where b = (vout - a*v1)/v2; ra = rg; rb = ra*a/b.
Worked example
With wanted output voltage Vout 10 V, gain on V1 10 V/V, rg 10 kΩ, input voltage V1 10 V, offset voltage V2 10 V, the calculator gives rf = 2.22e-15 kΩ; ra = 10 kΩ; rb = -11.1111 kΩ.
How to read the result
The main result is the rf, shown after you click Calculate; the copy button next to it copies the value. Additional results: ra, rb.