مقاومة مضخم عمليات غير عاكس


Designs the circuit so that Vout = gain × V1 + offset from V2.

يصمم الدارة بحيث Vout = gain × V1 + إزاحة من V2. تُضبط Ra مساويةً لـ Rg.

أدخل القيم:
V/V
النتائج:

About this calculator

Designs the circuit so that Vout = gain × V1 + offset from V2. Ra is set equal to Rg.

What you need

  • Wanted output voltage Vout; the unit box converts between mV, V, kV.
  • Gain on V1 in V/V.
  • Rg; the unit box converts between Ω, kΩ, MΩ.
  • Input voltage V1; the unit box converts between mV, V, kV.
  • Offset voltage V2; the unit box converts between mV, V, kV.

Formula

Rf = rg*(a*(ra+rb)/rb - 1).

Ra = ra.

Rb = rb.

Where b = (vout - a*v1)/v2; ra = rg; rb = ra*a/b.

Worked example

With wanted output voltage Vout 10 V, gain on V1 10 V/V, rg 10 kΩ, input voltage V1 10 V, offset voltage V2 10 V, the calculator gives rf = 2.22e-15 kΩ; ra = 10 kΩ; rb = -11.1111 kΩ.

How to read the result

The main result is the rf, shown after you click Calculate; the copy button next to it copies the value. Additional results: ra, rb.