Amplificatore RF


Enter the transistor S-parameters at the design frequency.

Inserisci i parametri S del transistor alla frequenza di progetto.

Inserisci i valori:
Ω
Ω
Ω
Ω
Risultati:
×
dB
Ω
Ω

About this calculator

Enter the transistor S-parameters at the design frequency.

What you need

  • System impedance Z₀; the unit box converts between Ω, kΩ, MΩ.
  • Frequency; the unit box converts between Hz, kHz, MHz, GHz.
  • Source impedance (real) in Ω.
  • Source impedance (imaginary) in Ω.
  • Load impedance (real) in Ω.
  • Load impedance (imaginary) in Ω.
  • Source matching network.
  • Load matching network.
  • S-parameters entered as.
  • S11 – magnitude / real.
  • S11 – angle / imaginary.
  • S12 – magnitude / real.
  • S12 – angle / imaginary.
  • S21 – magnitude / real.
  • S21 – angle / imaginary.
  • S22 – magnitude / real.
  • S22 – angle / imaginary.

How to read the result

The main result is the rollet stability factor K, shown after you click Calculate; the copy button next to it copies the value. Additional results: |Δ|, stability, maximum available gain.